Kodak Film Emulation LUTs for DaVinci Resolve & Premiere
Craft authentic cinematic analog warmth with calibrated Kodak 2383 print stock, Vision3 500T, and Portra 400 .CUBE profiles for Sony, Canon, DJI, and Apple Log footage.
Kodak Vision3 500T (5219)
Rich skin tones, gentle highlight roll-off, and subtle red-orange halation characteristics of motion picture negative film.
Kodak 2383 Film Print Emulation
The definitive film print look used in countless Oscar-winning films. Deep ink shadows, rich cyan separation, and creamy highlights.
Shot on Kodak Vision3 500T 5219 ยท Graded to Kodak 2383 D55
Why Kodak 2383 is the Backbone of Cinema
In analog filmmaking, the image captured on camera is just the beginning. The camera film is a camera negative (like Kodak Vision3 500T 5219). But audiences never saw the negative in theaters. The negative was optically printed onto a high-contrast film print stock, overwhelmingly Kodak 2383.
It is the Kodak 2383 print stock that provides the signature "movie look": rich subtractive color density, gentle shoulder rolloff that prevents harsh digital clipping, and deep, teal-undertoned shadows. Digital sensors capture light in an additive, linear fashion; applying a true 2383 Film Print Emulation (FPE) restores the organic, subtractive color behavior of physical silver halide crystals.
The Correct Node Tree in DaVinci Resolve
A film print LUT expects Cineon Film Log input, NOT camera log directly. Follow this exact 5-node structure for Hollywood-grade results:
kodak-vision3-500t-5219-1951.cube or kodak-film-2383.cube. Shapes dynamic range to Rec.709.
One-Click Setup in Premiere Pro Lumetri
In Adobe Premiere Pro, select your camera clip on the timeline and open the Lumetri Color panel:
- Under Creative (not Basic Correction), open the Look dropdown.
- Click Browse... and select
kodak-vision3-500t-5219-1951.cube. - Adjust the Intensity slider between 75% and 90% for a perfectly balanced modern film look.
- Use Basic Correction > Exposure to compensate for bright sunlight or shadows.
Normalize Your Camera Log Before Film Print
Rec.709 Hub
Official conversion transforms for Sony, Apple, DJI, Canon.
SONY ALPHA & FXSony S-Log3 Guide
VENICE s709 & +1.7 EV Base ISO exposure rule.
IPHONE PROApple Log Guide
33x & 65x ProRes Log transforms for CapCut & NLEs.
DJI POCKET 3DJI Pocket 3 Guide
D-Log M 10-bit exposure matrix and conversion.
Kodak Film LUTs: Frequently Asked Questions
What is the difference between Kodak Vision3 5219 and Kodak 2383?
Vision3 500T 5219 is a camera negative stock: low contrast, wide latitude and tungsten-balanced. Kodak 2383 is the print stock the negative was projected through, and it supplies most of the contrast, the dense blacks and the warm-highlight, cool-shadow crossover associated with the "film look".
Can I apply a Kodak film LUT directly to log footage?
Usually not. Film print emulations expect a normalized image, so convert your camera log (S-Log3, D-Log M, Apple Log, C-Log3) to Rec.709 or a Cineon-style intermediate first, then apply the Kodak look. Check the input gamma badge on each LUT page before using it.
Where does the Kodak 2383 LUT go in a DaVinci Resolve node tree?
Place it on one of the last nodes, after primary correction and the camera conversion. Grade exposure and white balance underneath it, and lower the node key output to 60-80% if the print contrast crushes the shadows.
Are these Kodak film emulation LUTs free for commercial projects?
Yes. The Kodak-inspired LUTs on MonoLUTs are free under the Open Creative License for client work, monetized YouTube and short films. They are emulations and are not affiliated with or endorsed by Eastman Kodak.